HOME > Products > FTTH Solution > OT200 series Fiber Ranger

The Fiber Ranger OT200 is a high performance optical fiber troubleshooter for locating fiber connector, break and imperfections. It detects event locations in the optical fiber and displays the results on the LCD display. This ranger is light, and easy to use, hence ideal for fiber cable troubleshooting, repairing, and restoration. The structure of fiber ranger is highly simplified to make it a low cost, high performance fiber optical test instrument. Although the fiber ranger neither displays the trace of the fiber nor gives any information about the fiber and event losses, it can identify fault types and locations, based on a set of pre-determined threshold values, in the entire length of the fiber under test.

Features

  • Identifying the fault type; Reflective or attenuate
  • OT-8210/8220 event dead zone as low as 5 m
  • Light, compact, portable, optical fiber tester
  • Backlight LCD display
  • Battery-low screen alert
  • Auto-off for battery saving
  • Built-in LED Flashlight
  • OT-8230/8240 equipped with

    RS-232 port for data transmission

    Applications

  • Fiber length measurement
  • Fiber fault event(s) locating
  • Fiber event(s) identification

    Specification


    Item \Model

    OT210

    OT220

    OT230

    OT240

    Sensor

    InGaAs

    Wavelength

    1310+-20
    nm

    1550+-20nm

    1310+-20
    nm

    1550+-20
    nm

    Fiber Under Test

    9/125um Single Mode Fiber

    Pulse Width

    20 ns / 200 ns

    200 ns / 1 us / 10 u s

    Reflection Event(Max)

    10 km-

    80 km-

    100 km-

    Non-Reflection Event(Max)

    10 km-

    40 km-

    50 km-

    Reflection Event
    Dead Zone

    < 5 m

    < 50 m

    Non-Reflection
    Event Dead Zone (3dB)

    < 40 m

    < 210 m

    Power Supply

    4 AA Size Alkaline 1.5 Volt Batteries

    Distance Accuracy
    (Reflective Even  Detection)

    +-4 m + 2 x 10-3x Distance

    		•